You need to build a boat dock if you own a boat. What is great about docks is that it is not only a place where your boat will stay, but it is also a great place where you can gather family and friends for a get together or do some fishing activities. Your dock needs to be strong and stable to bear the elements. You will have a great gathering place if you are able to build your own boat dock. If you are going to do a DIY boat dock project , then you will benefit from the instructions given below.
The first thing you need to determine is how large you want your boat dock to be. The length of the landing area is determined by the water depth. If the water is deep, then a short dock would suffice and vice versa. This guarantees safe docking.
Docks usually are 4 feet wide and extend 12 to 16 feet out over the water. A second section attached to the first is located in the open water and is generally larger usually the size of 12 square feet. This section is larger and enables the movement of more groups of people preparing to board or disembark a boat o those hanging around the dock.
The first section measures 4 feet by 12 feet long. Pressure treated lumber of 2″ x 6″ measuring 12 feet is used for constructing the frame of the first section. Then you need to screw down three of these pieces to one end of a fourth piece that is 4 feet wide. At the midsection and the remaining end of the longer boards, this process is repeated before completing the frame. You can screw the floor boards to this frame vertically to the longer boards below for the second section that hosts the visitors.
The second section has to be stronger than the first, although with similar construction, since it has to sustain more loads over a larger area. At a distanceof 16 inches apart, the framing lumber should lie parallel to one another. This will be similar to the first section in that the floor boards has to be attached vertically with the framing lumber as guide. Attaching the first and second sections together would need eye bolts and steel rods. This will allow easy separation of the sections and free pivoting motion if the current in the water is rough. You should securely attach your posts to the side of the dock as it will help the boats to be tied to them, and buoys have to be fastened on the sides for preventing the boat to scrape against the dock.
If you need materials for your dock construction, choose Decks and Docks lumber company for quality products.